| Item | Unit | CNV-850 |
|---|---|---|
| Travel | ||
| X axis travel | mm(in) | 850(33.4") |
| Y axis travel | mm(in) | 520(20.4") |
| Z axis travel | mm(in) | 520(20.4") |
| Distance from spindle nose to table surface | mm(in) | 110~630(43" ~ 24.8") |
| Distance from spindle center to column | mm(in) | 630(24.8") |
| Table | ||
| Table dimension | mm(in) | 950 × 520(37.4" x 20.4") |
| Max. loading weight | kg(lb) | 500(1,102) |
| T-slots (W x No. x P) | mm(in) | 18 x 5 x 100(0.7" x 5 x 3.9") |
| Spindle | ||
| Spindle speed(OPT) | rpm | 8,000(10,000 / 12,000 / 15,000) |
| Spindle motor | kW(HP) | 7.5 / 11(15) |
| Spindle taper | type | 7/24 taper No.40 |
| Automatic Tool Changer | ||
| ATC type(OPT) | type | Arm type(Carrousel) |
| Tool shank | type | BT-40 |
| Pull stud | type | P-40T (45°) |
| Tool storage capacity(OPT) | pcs. | 24(20) |
| Max. tool diameter | mm(in) | Ø80(Ø3.1") |
| Max. tool diameter (Adjacent empty) | mm(in) | Ø150(Ø5.9") |
| Max. tool length | mm(in) | 250(9.8") |
| Max. tool weight | kg(lb) | 7(15) |
| Tool change time (Tool to Tool) | sec. | 2.5 |
| Tool change time (Chip to Chip) | sec. | 7 |
| Feedrate | ||
| Rapid feedrate (X / Y / Z) | m(in)/min | 30 / 30 / 30 (1,181.1 / 1,181.1 / 1,181.1) |
| Cutting feedrate | mm(in)/min | 10,000(393.7) |
| Other | ||
| Floor plan (W × D) | mm(in) | 2,930 × 2,260(115" x 88") |
| Machine weight | kg(lb) | 5,000(11,023) |
| Max. machine hight | mm(in) | 2,680(105") |
| Air source | kg/cm2(PSI) | 6~8(85~113) |
| Power capacity | KVA | 15 |
